Best Audi A8 Fresh Air Blower Replacment - Hi friends Audi Sport Car, In the article that you read this time with the title Best Audi A8 Fresh Air Blower Replacment, We have prepared this article well for you to read and retrieve information from it. hopefully fill the posts Article lainnya, we write this you can understand. Alright, happy reading.

Title : Best Audi A8 Fresh Air Blower Replacment
link : Best Audi A8 Fresh Air Blower Replacment

Best Audi A8 Fresh Air Blower Replacment

Overview

The next physical care for is to live on used on the A8 D2 platform, although it may live on the same for the D3.

Please consult the Bently manual before using this procedure.

Determining if you lot ask this procedure.

1. It stops producing consistent flow.
2. It starts to hit excessive dissonance such equally squealing.
3. It cuts out completely when taking corners.
4. The VAG-COM produces this when testing Address 08 - Auto HVAC:
   
   

01273 - Fresh Air Blower (V2) 17-00 - Control Difference

Time & Costs

1. Approximate parts cost: $150.00 - $200.00, depending where you lot buy.
   Check the AudiPages parts suppliers list.
2. Approximate fourth dimension needed: 1.5 - 2.5 hours depending on experience.
3. Approximate coin saved doing it yourself: $400 - $500 US.

Tools Required

1. 3/8" displace ratchet.
2. Metric 3/8" displace brusque socket 10mm.
3. 3/8" displace universal-joint trend displace adapter. (Helpfull)
4. 3/8" displace 9" extension.
5. Number ii Phillips screwdriver. H5N1 magnetic i is best.
6. Number 1 Phillips screwdriver. H5N1 regular one, alongside a skinny shaft.
7. 90° Number ii Phillips screwdriver - Must live on brusque depth 90°.
8. Long Flat-tip screwdriver.
9. Medium-size needle olfactory organ pliers.
10. Long, thin, small-sized box-end wrench.

Optional Tools
I bought this at the Craftsman store, together with it actually reduced the fourth dimension removing four of the screws.
It tin sack too live on used alongside the shortened torx bix for the transmission filter change.



Sears item #00904116000 Mfr. model #4116

Parts Required

1. Fresh Air Blower, Part # 4D0 959 101

Procedure:

1. Use the #2 Philips: Remove the 3 screws asset the Fresh Air Intake grill.
   

   

   
   
2. Use the #2 Philips: Remove the bottom 3 screws of the plenum. (Shown yesteryear the bottom 3 cerise circles)
   

   

   
   
3. Use the #1 Philips: Remove the top corner screws of the plenum, yesteryear gently pushing through the wiper grill.
   

   

   
   
4. Use the Short Depth 90° #2 Philips together with Needle-Nose pliers: Loosen the top middle plenum screw alongside the short-depth 90° screw driver, together with and then purpose the needle-nose pliers to loosen the remainder.
5. Use the Long Flat-tip screwdriver: Disengage all four clips on the side of the plenum, together with gently pry the wires out from their servant clips. There are 3 wire clips; ii on the rider side together with i on the driver's side.
   

   

   
   
6. Use the #2 Philips:Gently elevator the plenum together with take the screw inwards the front end (hidden until now) that holds the wiring clamp. You tin sack straight off lay the plenum off to the side, exposing the fan cowl. Take Federal Reserve notation of the six screws neede to take it.
   

   

   
   
7. Use the Short Depth 90° #2 Philips (optionally, the ratchet 90°) small-sized box-end wrench: Remove the bring upwards screws. Notice how I used the box-end wrench to apply the downward describe per unit of measurement area needed to expire along the 90° ratchet screwdriver on the screw. This speeded things upwards considerably.
   

   

   
   
8. Use the same physical care for above:Remove the top screws (the screws that aspect upwards outboard) on either side of the cowl, together with and then take the cowl.
   

   

   
   
9. Use the 10mm socket, the 3/8" universal, 9" extension together with 3/8" ratchet: Remove the bring upwards together with and then the front end 10mm bolts off the fan servant bracket. Then, using the flat-tipped screwdriver or your fingernail, disconnect the eletrical connector.
   

   

   
   
10. Comparison of Old & New:
    

    

    
    And accept a hold back at the amount of carbon:
    

    

The article of apparel on the fan commutator:
Picture courtesy of matrixabc of the AudiWorld A8 Forum.




This fan bearing painting too came from matrixabc of the AudiWorld A8 Forum.
The bearing is company together with not ball bearings:




11. Take this chance to inspect the oestrus exchanger fins:
    

    

    
    
12. Insallation of bracket on novel fan:Take extra attention to brand certain all iii items problem below problem upwards when installing the bracket on the novel fan. The left nearly is a especial of a tab on the rubber. The other ii are the routing of the wire.
    Note: The wire comes off the top rider side of the fan!
    

    

    
    

    

    
    
13. Mount the fan yesteryear reversing Step 9:
    

    

    
    
14. TEST!!! Make certain you lot plough the ignition fundamental to the "ON" postition, together with manually plough the fan speed to high. If the fan does non turn, lift to the Bently manual for additional troubleshooting procedure, including examination for voltage, etc.
    
    
15. Test successful - Install the cowl - Reverse Steps seven & 8
    
    
16. TEST AGAIN!!! Make certain you lot plough the ignition fundamental to the "ON" postition, together with manually plough the fan speed to high. Listen for whatsoever rubbing on the cowl, etc.
    
    
17. Test successful - Install remaining components - Reverse Steps six through 1: Start at Step six together with operate your agency dorsum until completely reinstalled.
    

    
    

Thus the article Best Audi A8 Fresh Air Blower Replacment

That's all the article Best Audi A8 Fresh Air Blower Replacment this time, hopefully can benefit you all. okay, see you in another article posting.

You are now reading the article Best Audi A8 Fresh Air Blower Replacment with the link address https://newaudisportscar.blogspot.com/2019/01/best-audi-a8-fresh-air-blower-replacment.html

Share this post